PC Concepts SHG2 DP - Manual (Page 56)

Error Reporting and Handling Intel® SHG2 DP Server Board Technical Product Specification
Intel Order Number C11343-001 Revision 1.0 44
CP Beeps Reason
D4 Pending interrupt error
D6 Initialize option ROM error
D8 Shutdown error
DA Extended Block Move
DC Shutdown 10 error
Table 31. Recovery BIOS POST Codes
CP Beeps Reason
E0 Initialize chip set
E1 Initialize bridge
E2 Initialize processor
E3 Initialize timer
E4 Initialize system I/O
E5 Check forced recovery boot
E6 Validate checksum
E7 Go to BIOS
E8 Initialize processors
E9 Set 4 GB segment limits
EA Perform platform initialization
EB Initialize PIC and DMA
EC Initialize memory type
ED Initialize memory size
EE Shadow boot block
EF Test system memory
F0 Initialize interrupt services
F1 Initialize real time clock
F2 Initialize video
F3 Initialize beeper
F4 Initialize boot
F5 Restore segment limits to 64 KB
F6 Boot mini DOS
F7 Boot full DOS
6.5.3 POST Error Codes and Messages
defines POST error codes and their associated messages. The BIOS prompts the user to
press a key in case of serious errors. Some of the error messages are preceded by the string,
‘Error‘, to indicate that a system that might be malfunctioning. All POST errors and warnings
are logged in the SEL unless it is full.