Primera Technology CD/DVD Duplication System DUP-07 - Manual (Page 25)

- 22 -
e. After 2 or 3 seconds of processing time, the following
Copy Progress Screen will appear.
Counter Specified
No Counter
OR
It is normal to see the progress indicator stays at 0-
10% and 100% for approximately 30 seconds for
CD duplication and up to 1 minute for DVD
duplication. That is caused by the initializing and
finalizing stages.
Once the duplication run is completed, the good copies will
be ejected and you shall see the following screen:
O
Copying ... H4012MB
0 12% Copying ... H4012MB
0/21 12%
- “4012MB” indicates the
capacity of the master disc.
-
“12%” indicates the current
progress of the duplication.
-
“0/21” indicates you have a
project size of 21 copies and
you have made 0 copies so far.
-
“H” indicates you are copying
from a Hard Drive Image.
- “4012MB” indicates the
capacity of the master disc.
-
“12%” indicates the current
progress of the duplication.
-
“0” indicates that you have
made 0 copies so far.
-
“H” indicates you are copying
from a Hard Drive Image.
PASS 7 FAIL 0( 7)
Waiting for Blanks
- “PASS 7” indicates that you’ve
just made 7 successful copies.
- “FAIL 0” indicates that you
have no failure in this run.
- “7” indicates that you’ve
successfully copied 7 copies so
far.