Primera Technology CD/DVD Duplication System DUP-07 - Manual (Page 66)

- 63 -
Setup Guide
I. Setup IEEE 1394 Firewire / USB 2.0 device(s)
For first time use
1. Turn your duplicator off if it is running.
2. Turn your computer off if it is running.
3. Set the IEEE 1394 Firewire/USB2.0 switch to “ON” at the
back of your duplicator.
4. Using the standard IEEE 1394 Firewire/USB 2.0 cable to
connect your computer and your duplicator.
5. Turn on your duplicator.
6. Turn on your computer.
7. After that, your computer will recognize a number of
external devices depend on the machine you purchased.
You need to reboot your duplicator every time when
you want to turn on/off the USB 2.0/Firewire
Device(s).
Every single PC related products have the compatibility
issue. Even though we have thoroughly tested your
Firewire/USB connection(s) before we shipped it out,
there’s still a slight chance that your PC/Mac computer is
not compatible with our Firewire/USB connection. If that
happens, please contact your PC/Mac manufacture for
possible configuration changes to make it work or try it
on other PC/Mac computers.