Primera Technology CD/DVD Duplication System DUP-07 User Manual
Page 8
- 5 -
Tutorial Guide:
I. Make Disc-to-Disc Copies
This process will copy your master disc into several blank discs
simultaneously. However, due to its simultaneous nature, a
good conditioned master disc and lower recording speed is
necessary for high success rate and good quality duplications.
When you turn on your duplicator, after it has booted up, you
should see the following signifying your duplicator is ready.
1. Make sure the Master Reading Source is set to the
READER.
It is very important to make sure that your current Master
Reading Source is the top tray in order to avoid
unnecessary error messages. To check the Master Reading
Source, please do the following:
a. Use UP or DOWN arrow buttons to navigate to the
following screen.
b. Press “>>” to enter Select Source Menu and you shall
see the following:
*** The Reader Port could be indexed as 2.0.
Either 1.0 or 2.0 is fine.
DUPLICATOR 5.00
1. COPY
DUPLICATOR 5.00
8. Select Source
Reader Port 1.0
Pioneer DVD-ROM