Primera Technology CD/DVD Duplication System DUP-07 - Manual (Page 33)

- 30 -
Tutorial Guide:
V.
Load Master Disc onto the Hard Drive
In order to copy from the Hard Drive, you are required to load your
master disc onto a hard drive partition.
The number of partitions is determined by dividing your Hard
Drive’s total capacity by 1GB for CD format, 5GB for DVD-5
format or 9 GB for DVD-9 format (Double Layer) and subtracting
one partition for system use.
For example, if you have a 40GB Hard Drive, you can calculate
the number of DVD-5 format partitions by: 40 / 5 = 8. Since there
is 1 partition reserved for the system use, you will have 7 partitions
to use.
Or you can calculate the number of DVD-9 format partitions by:
40 / 9 = 4.17. Since you cannot use an incomplete partition, there
will be a total of 4 partitions available for a 40GB Hard Drive.
Since 1 partition is reserved for system use; there will be 3
partitions available for use.
To load your master disc onto a hard drive partition, please do the
following:
1. Make sure the Master Reading Source is set to the Hard
Drive.
It is very important to make sure the Master Reading Source
is set for the Hard Drive in order to avoid unnecessary error
messages. To check the Master Reading Source, please do the
following:
a. Use UP or DOWN arrow button to navigate to the
following screen.
DUPLICATOR 5.00
8. Select Source