Primera Technology CD/DVD Duplication System DUP-07 - Manual (Page 76)

- 73 -
5.
The failure rate is high.
9
Lower the “write speed” and try again. Please refer to
“Tutorial III – Select the Duplication Speed.”
9 Quality of blank disc may be poor.
9 Quality of your master disc may be poor.
6.
Do I need to upgrade my duplicator’s firmware?
9 Unless your system is getting unstable, we strongly suggest
not upgrading your duplicator’s firmware. Please contact our
Tech Support if your system is getting unstable.
7.
Cannot boot-up or fails to upgrade firmware.
9 Contact our Tech Support.
8.
Can I load data directly from my computer to my
duplicator’s Hard Drive?
9 No, your duplicator’s Hard Drive has a unique file system that
computers will not recognize. Thus, you can’t perform any
read/write operations to the Hard Drive from your computer.
9.
Why some writers won’t copy?
9
If those writers are connected with USB 2.0/Firewire
IEEE 1394 connections, please make sure the switch on
the back of the duplicator is off and restart your
duplicator.
9 Reset back to default. ( Troubleshoot #11 )
9 Contact our tech support.
10. Why does my duplicator stay at “System Bootup”?
9 The reason you saw system bootup forever is caused by
improper shutdown. To solve the problem, please
contact our tech support for more information. Even
though this problem can be solved, all the hard drive
information will be lost due to this failure.