Primera Technology CD/DVD Duplication System DUP-07 - Manual (Page 72)

- 69 -
13. Utility
13.1 Disc Info
If you are uncertain about the type of blank recordable
media you are using, the duplicator is equipped with the
disc info function to help identify and notify you of the
disc information encoded within.
This function (Disc Info) can be found in the “Utility”
menu. This feature will identify your blank recordable
Media’s format, capacity, manufacture ID as well as the
Media’s certified writing speed.
- This feature only applies to media in the
recording trays.
13.2 Prescan
Approximately 50% of failures reported by our duplicator
are caused by errors in the master disc which our Reader
couldn’t overcome. When this kind of failure occurs, it
tends to waste all of your blank recordable medias.
To help detect flaws in the master disc prior to
performing the duplicating process, we introduce the
“Prescan” feature. This feature will scan and detect any
bad sectors existing in the master disc. It is
recommended to perform this feature before starting the
duplication task for all master discs. By doing so you can
prevent wasting the blank media if there is an error in the
master disc.
13.3 System Info
By entering this menu, you will be able to see the many
specification of your duplicator such as the firmware
version, CPU type, RAM capacity. You can check the
specifications by pressing UP or DOWN button.