Primera Technology CD/DVD Duplication System DUP-07 - Manual (Page 70)

- 67 -
When it is Off, the copy process requires you to press
“>>” button to confirm the duplication.
When it is Auto, if your duplicator has detected 3 blank
discs on a 4 target or higher duplicator for example and
didn’t detect any additional blank discs for 30 seconds,
then the duplication will be started automatically.
However, in order for this feature to take effect, you need
to be inside the operation menu such as COPY, TEST,
TEST+COPY, and COPY+COMPARE.
12.3 Read Error Skip
Normally, when the duplicator encountered a reading
error while reading your master disc, all the duplication
will be aborted and all the recordable media will be
ruined. However, if you believe that your master disc has
a small, insignificant error due to physical damages, you
can enable the setting to allow the duplicator to skip any
read error* it has encountered.
*This function will not fix the error; it will only skip it to
make the rest of the data readable.
12.4 CD Writing Mode
This setting will allow you to select which mode you
would like to duplicate a CD. There are two different
modes, “Disc at Once” and “Track at Once”. Unless you
understand completely what they mean, we strongly
suggest you to set it as “Disc at Once”.
12.5 Max Audio & VCD Speed
Audio CD’s and Video CD’s do not have internal error
checking capability, so duplicating at too high a speed
may cause frequent errors. This setting will allow you to
adjust the maximum duplication speed for Audio and
Video CD.