Proxim ORiNOCO AP-2500 - Manual (Page 155)

155
Public Space Parameters
5. If authorizing a user based on MAC address (in other words, the PublicSpace > AAA > Internal > Enable User
Name option is disabled), enter the MAC address of the subscriber’s wireless card in the field provided.
•
If you have chosen to manage this subscriber by user name only, you do not need to enter a MAC address
(however, you will need to enter a user name).
6. Enter an IP Address for the subscriber or leave the field blank.
• If left blank, the AP fills in this field automatically after a subscriber logs in.
7. If authorizing a subscriber based on user name and password, enter a User Name and Password for the
subscriber in the fields provided.
NOTE
User Name and Passwords are case-sensitive.
8. Enter the subscriber’s allowed access time in the Expiration Time fields (in hours and/or minutes).
• If you leave these fields blank or set them to 0, the subscriber will never time out.
• If you enter hours and/or minutes, the timeout counter will begin as soon as you click OK.
• After the subscriber has timed out, he/she must re-subscribe to the service.
9. Configure the Amount Paid field, if desired. The AP automatically fills in this fields after a successful credit card
purchase.
10. Configure the optional User Alias fields, if desired. These are for notes only and do not have an impact on the
authentication process.
11. Define the Upstream and Downstream Bandwidth limits for the user in Kbps. The user’s bandwidth is not limited
if you leave this blank or set it to 0.
12. Click OK to add the subscriber.
13. Add additional subscribers, if desired.
14. When finished, click the back arrow button to return to the previous screen.
Removing a Subscriber
Follow these steps to remove a subscriber from the Authorized Subscribers Table:
1. Login to the AP’s Web browser interface.
2. Click Subscriber > Authorized.
3. Click Edit.
4. Locate the entry for subscriber you want to delete and set Status to Destroy.
5. Click OK to remove the entry.
6. Click the back arrow button to return to the previous screen.
NOTE
An active subscriber will immediately lose his/her access to the Internet if the subscriber’s entry is deleted.
You can also delete active subscribers from Monitor > Subscribers. See
Current Subscribers Table .