System alarms (traps), Security alarms, Wireless interface card alarms – Proxim ORiNOCO AP-2500 User Manual

Page 181: Operational alarms, Flash memory alarms, Tftp alarms, Troubleshooting

Advertising
background image

181

Troubleshooting

6. Change the IP Address and other network values using set and reboot CLI commands, similar to the example

dialog below (use your own IP Address and IP Mask). Result: After each entry the CLI reminds you to reboot;
however wait to reboot until all commands have been entered.

[Device name]>

set ipaddrtype static

[Device name]>

set ipaddr <IP Address>

[Device name]>

set ipsubmask <IP Mask>

[Device name]>

set ipgw <Default Gateway IP Address>

[Device name]>

reboot 0

7. After the AP-2500 reboots, verify the new IP Address by reconnecting, and then entering a show ip CLI statement

(as in Step 5). Alternatively, you can use the “ping” network command from networked computers to test the new IP
Address.

8. When the proper IP Address is set, use CLI or the HTTP Interface over the LAN to complete configuration and

manage operations.

System Alarms (Traps)

Security Alarms

Wireless Interface Card Alarms

Operational Alarms

FLASH Memory Alarms

TFTP Alarms

oriTrapAuthenticationFailure

Wireless Card (A and/or B) incompatible vendor detected

oriTrapUnauthorizedManagerDetected

Wireless Card (A and/or B) firmware download failure detected

oriTrapWLCNotPresent

Wireless Card (A and/or B) not present

oriTrapWLCFailure

Wireless Card (A and/or B) general failure

riTrapWLCRemoval

Wireless Card (A and/or B) removal

oriTrapWLCIncompatibleFirmware

Wireless Card (A and/or B) incompatible firmware detected

oriTrapWLCVoltageDiscrepancy

Wireless Card (A and/or B) voltage discrepancy detected

oriTrapWLCIncompatibleVendor

Wireless Card (A and/or B) incompatible vendor detected

oriTrapWLCFirmwareDownloadFailure

Wireless Card (A and/or B) firmware download failure detected

oriTrapWatchDogTimerExpired

Watch Dog Timer has expired

oriTrapRADIUSServerNotResponding

RADIUS Server is not responding or error communicating with RADIUS Server

oriTrapModuleNotInitialized

Module has not been initialized

oriTrapDeviceRebooting

Device is rebooting

oriTrapTaskSuspended

Task suspension has been detected

oriTrapBootPFailed

BootP failure detected (no response from BootP Server)

oriTrapDHCPFailed

DHCP Client failure detected (no response from DHCP server)

oriTrapFlashMemoryEmpty

Flash memory card detected empty

oriTrapFlashMemoryCorrupted

Flash memory data corrupted

oriTrapTFTPFailedOperation

FTP (upload or download) failure detected

oriTrapTFTPOperationInitiated

TFTP (upload or download) operation initiated

oriTrapTFTPOperationCompleted

TFTP (upload or download) operation completed

Advertising