Proxim ORiNOCO AP-2500 - Manual (Page 231)

231
Using the Command Line Interface
Miscellaneous Parameters
CLI Monitoring Parameters
Using the “show” command with the following table parameters will display operating statistics for the AP-2500 (these
are the same statistics that are described in
Monitor Information for the HTTP Web interface).
– staticmp. Displays the ICMP Statistics.
– statarptbl. Displays the IP ARP Table Statistics.
– statbridgetbl. Displays the Learn Table.
– statif. Displays information and statistics about the Ethernet and wireless interfaces.
– stat802.11. Displays additional statistics for the wireless interfaces.
– statethernet. Displays additional statistics for the Ethernet interface.
– datSessionTable. Displays the Dynamic Address Translation (DAT) table.
Name Type Values Access CLI Parameter
Miscellaneous Group N/A R misc
Partner Image
Splash Screen Integer disable (0)
enable (1) RW/Reboot partnerImageOn
Partner Image
Filename DisplayString
Size(1..32) User Defined RW/Reboot partnerImageFileName
Maximum
Subscribers Allowed Integer N/A R maxNumSubscribers
Enable PPTP Integer disable (0)
enable (1) RW/Reboot pptpOn
PPTP Session Idle
Timeout Integer User Defined RW/Reboot pptpIdleTimeout
Enable IPSec Integer disable (0)
enable (1) RW/Reboot ipsecOn