Planet Technology WLS-1280 - Manual (Page 33)

30
y
Static IP Address: Manually specifying the IP address of the WAN1 Port is applicable for the network
environment where the DHCP service is unavailable. The fields with red asterisks are required to be filled in.
IP Address: the IP address of the WAN1 port.
Subnet Mask: the subnet mask of the WAN1 port.
Default Gateway: the gateway of the WAN1 port.
Preferred DNS Server: The primary DNS Server of the WAN1 port.
Alternate DNS Server: The substitute DNS Server of the WAN1 port. This is not required.
y
Dynamic IP address: It is only applicable for the network environment where the DHCP Server is available in
the network. Click the Renew button to get an IP address.
y
PPPoE Client: Common ADSL connection type. When selecting PPPoE to connect to the network, please set
the “Username”, “Password”, “MTU” and “CLAMPMSS”. There is a Dial on Demand function under PPPoE.
If this function is enabled, a Maximum Idle Time can be set. When the idle time is reached, the system will
automatically disconnect itself
y PPTP Client: Point to Point Tunneling Protocol is a service that applies to broadband connections used mainly
in Europe and Israel. Select STATIC to specify the IP address of the PPTP Client manually or select DHCP to
get the IP address automatically. The fields with red asterisks are required to be filled in. There is a Dial on
Demand function under PPPTP. If this function is enabled, a Maximum Idle Time can be set. When the idle
time is reached, the system will automatically disconnect itself