Planet Technology WLS-1280 - Manual (Page 40)

37
y Uncontrolled
Operation Mode: Choose one of the two modes, NAT mode and Router mode, by the requirements.
IP Address: Enter the desired IP address for the uncontrolled port.
Subnet Mask: Enter the desired subnet mask for the uncontrolled port.
y DHCP Server Configuration
There are three methods to set the DHCP server: Disable DHCP Server, Enable DHCP Server and Enable
DHCP Relay.
1. Disable DHCP Server: Disable DHCP Server function.
2. Enable DHCP Server: Choose “Enable DHCP Sever” function and set the appropriate configuration for
the DHCP server. The fields with red mark are required. Please fill in these fields.