Planet Technology WLS-1280 User Manual
Page 58
55
y Trans Full Name: When enabled, the ID and postfix will be transferred to the RADIUS server for authentication.
When disabled, only the ID will be transferred to RADIUS server for authentication.
y NASID: Enter the NASID of PLANET WLS-1280 for the RADIUS server.
y Server IP: Enter the IP address/domain name of the RADIUS server.
y Authentication Port: Enter the authentication port of the RADIUS server and the default value is 1812.
y Accounting Port: Enter the accounting port of the RADIUS server and the default value is 1813.
y Secret Key: Enter the key for encryption and decryption.
y Accounting Service: Select this to enable or disable the “Accounting Service” for accounting capabilities.
y Authentication Protocol: There are two methods, CHAP and PAP for selection.
y Policy Mapping: Enable or disable policy mapping by RADIUS class attributes.
y