Ap discovery, 2 ap discovery – Planet Technology WLS-1280 User Manual
Page 97
94
4.3.2 AP Discovery
Use this function to find out all the APs in the network segments.
y Interface: Check the Controlled LAN or/and the Uncontrolled LAN and the IP address and Pool Size (the
discovered APs will be configured to use IP address in this IP pool).
y AP Access: Input the IP Address, ID and Password of the AP.
Then click the Discover button and the devices match the given settings will show in the list below. For the desired
device, input the desired Name and IP address, select one template, check it and then click Add to add it under the
managed list. (About the template, please see 4.3.4 Template).
If the any IP address within the assigned Base IP and the Pool Size has been used, the used IP address will be
listed and a warning message will show up. Please change the settings of Base IP or Pool Size.