Controlled configuration, 6 controlled configuration – Planet Technology WLS-1280 User Manual
Page 37
34
4.1.6 Controlled Configuration
The controlled port has the user authentication function which can be enabled or disabled.
y Controlled
Operation Mode: Choose one of the two modes, NAT mode and Router mode, by the requirements.
IP Address: Enter the desired IP address for the controlled port.
Subnet Mask: Enter the desired subnet mask for the controlled port.
y DHCP Server Configuration
There are three methods to set the DHCP server: Disable DHCP Server, Enable DHCP Server and Enable
DHCP Relay.
1. Disable DHCP Server: Disable DHCP Server function.
2. Enable DHCP Server: Choose “Enable DHCP Sever” function and set the appropriate configuration for
the DHCP server. The fields with red mark are required. Please fill in these fields.