Limiting stations to regional, Programming 50, Receiving traffic announcements 50 – Pioneer ANH-P9R-BK User Manual

Page 50: Turning the ta function on or off 50, Limiting stations to regional programming, Receiving traffic announcements

Advertising
background image

05

Section

En

50

RDS

Limiting stations to regional
programming

When AF is used to automatically retune fre-
quencies, the regional function limits the selec-
tion to stations broadcasting regional
programs.

1 Press

FUNC

and then press

REG

to select

the regional mode.

2 Press

REG

to turn the regional function on.

The light illuminates.
• Press

REG

again to turn the regional function

off.

Notes

• Regional programming and regional networks

are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).

• The preset number may disappear from the

display if the tuner tunes in to a regional sta-
tion which differs from the originally set sta-
tion.

• The regional function can be turned on or off

independently for each FM band.

Receiving traffic announcements

The TA (traffic announcement standby) function
lets you receive traffic announcements auto-
matically, no matter what source you are listen-
ing to. The TA function can be activated for both
a TP station (a station that broadcasts traffic
information) or an enhanced other network’s TP
station (a station carrying information which
cross-references TP stations).

Turning the TA function on or off

1 Press

2 or 3 to tune in to a TP or

enhanced other network’s TP station.
The “TRFC” indicator lights when the tuner is
tuned in to a TP station or an enhanced other
network’s TP station.

2 Press

TA

to turn the TA function on.

The “

3TRFC” indicator lights, indicating that

the tuner is waiting for traffic announcements.
• Press

TA

again when no traffic announce-

ment is being received to turn the TA function
off.

Notes

• The system switches back to the original

source following traffic announcement recep-
tion.

• The TA function can be activated from sources

other than the tuner if the tuner was last set to
the FM band but not if it was last set to the
MW/LW band.

• If the tuner was last set to FM, turning on the

TA function lets you operate other tuning
functions while listening to sources other
than the tuner.

• If you switched the TA function on while tuned

in to neither a TP nor an enhanced other net-
work’s TP station, only “T” in the “

3 TRFC”

indicator lights.

Advertising