Pioneer ANH-P9R-BK - Manual (Page 87)

Other Functions
En 87
Selecting the wall paper pattern
There are three patterns to choose from.
1 Press NEXT to display C.MENU .
Press NEXT until C.MENU appears.
2 Press C.MENU and then press PTRN to
select the wall paper pattern mode.
3 Press any of the buttons A – C to select the
desired pattern.
Using the AUX source
An IP-BUS-RCA interconnector such as the CD-
RB20 or CD-RB10 (sold separately) lets you
connect this product to auxiliary equipment
featuring RCA output. For more details, refer to
the IP-BUS-RCA interconnector’s owner’s man-
ual.
Selecting AUX as the source
1 Press SOURCE to select AUX as the source.
Press SOURCE until AUX appears.
• If the auxiliary setting is not switched on, AUX
cannot be selected. For more details, see
Switching the auxiliary setting on page 82.
Entering the AUX title
The title displayed for the AUX source can be
changed.
1 Press SOURCE to select AUX as the source.
Press SOURCE until AUX appears.
2 Press FUNC and then press TTLin to select
the AUX title input mode.
Refer to Entering disc titles on page 64, and
perform procedures 3 to 7 in the same way.
Note
• Even if you do not press TTLin you can enter
the title, but you will not be able to change the
character types.
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
12
Section