Panasonic DIGA DMR-EA18 - Manual (Page 10)

10
RQT9048
Setting the Set Top Box Control and Clock
Preparation:
Turn on the television and select the appropriate video
input to suit the connections to this unit (Example: AV input).
When using the set top box, make sure it is turned on.
These are the first settings you make upon buying the
unit. You don’t need to make these settings again. •
•
•
to turn the unit on.
When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable ( ➔ 9), it
acquires the setting information from the TV. When the
Quick Start Setting screen appears ( ➔ below, step 4)
•
Language:
e , r to select, then
When the Quick Start Setting screen
appears after this step (
➔ below, step 4)
•
English
Español
Français
Press OK
Pulse OK
Appuyer sur OK
Select Language
Seleccione el idioma
Sélection de langue
TV Aspect Ratio:
e , r to select “4:3 TV” or
“16:9 Widescreen TV”, then
Aspect Ratio Selection
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
4:3 TV
16:9 Widescreen TV 16:9
4:3
When connecting to a 4:3 standard aspect TV:
Select “4:3 TV”.
When connecting to a 16:9 widescreen TV:
Select “16:9 Widescreen TV”. •
•
Quick Start Function:
e , r to select “On” or “Off”,
then
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Set Top Box Control Settings:
e , r to select “Yes”, then
If you do not control your set top box with
this unit: Select “No”.
The unit then displays “Set Clock Manually”
screen ( ➔ 12, step 10).
•
STB (Set Top Box) IR Settings
This unit can control your STB
(Set Top Box), when connected to IN1
input using the Set Top Box Control cable.
Start setup now?
Yes
No
12
Tips
“Quick Start” function (➔ 43)
If you set Quick Start to on, you can start
recording to DVD-RAM about 1 second
after you press [^ DVD POWER] to turn
the unit on and then sequentially press
[* REC].
The following happens when you have
selected “On”.
Power consumption in standby mode
increases because power is supplied to
the unit.
To view programs from the set top box
If the TV is not directly connected to the
set top box, then turn on this unit in the
following cases:
“Quick Start” is “Off”.
“Quick Start” is “On” with this unit being
connected to the TV via a component or
HDMI cable.
To zoom in on video
1. Press [SUB MENU],
2. Press [e, r] to select “Zoom In”, then
press [OK].
To return to the previous screen
Press [RETURN].
•
–
•
–
–
•