Panasonic DIGA DMR-EA18 - Manual (Page 61)

61
RQT9048
Ref
erence
On the TV
Page
Cannot finish recording
completely. The program was copy-protected. • −
The disc may be full. • −
There are already 99 recordings ( +R +R DL +RW 49 recordings). • −
Cannot play. You inserted an incompatible disc (discs recorded in PAL video, etc.). • 56
Cannot record on the disc. The disc may be dirty or scratched. • 54
Unable to format.
Please check the disc.
Cannot record. Disc is full.
RAM -RW(V) +RW Create space by erasing unwanted recordings. Even
if you erase recorded content from the DVD-R, DVD-R DL, +R or +R DL,
there is no increase in disc space. Available recording space on a DVD-RW
(DVD-Video format) or +RW disc increases when the last recording is deleted
(space may increase slightly when you delete other recordings).
• 16, 32,
40
Cannot record. The number of
recordings has exceeded the
maximum limit.
Use a new disc. • −
Error has occurred.
Please press OK. Press [OK] to start the recovery process. You cannot operate the unit while
it is recovering [“ ” (Self Check) appears on the unit’s display]. • −
No disc You haven’t inserted a disc. Correctly insert a disc that the unit can play. • 7, 55, 56
The disc is upside down. If it is a single-sided disc, insert it so the
label is facing up. • 7
No folders. There are no compatible folders on the disc. • 57
No SD Card
No valid SD card. The card is not inserted. If this message is displayed while a
compatible card is already inserted, turn off the unit, remove the card,
then re-insert the card.
The card inserted is not compatible or the card format does not match. •
•
7
56, 57
Please change the disc. There may be a problem with the disc. Press [; OPEN/CLOSE] on
the main unit to remove the disc to check for scratches and dirt. (The
unit turns off automatically after you open the tray.) • −
Please set the clock. The clock is not set when recording programs or setting scheduled
recording. Set the clock. • 43
This is a non-recordable disc. The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized
DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL, or +RW disc. • 55
The disc may be incompatible or of poor quality. • 55 to 57
This disc is not formatted
properly. You inserted an unformatted DVD-RAM, DVD-RW, or +RW disc.
Format the disc with the unit. • 40
The operation is prohibited by the unit or disc. • −
Product Service
1. Damage requiring service− The unit should be
serviced by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been
damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing− Do not attempt to service the unit beyond
that described in these operating instructions. Refer all
other servicing to authorized servicing personnel.
3. Replacement parts− When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check− After repairs or service, ask the servicer
to perform safety checks to confirm that the unit is in
proper working condition.
Product information
For product information or assistance with product operation:
Refer to “Customer Services Directory” on page 71.