Panasonic DIGA DMR-EA18 - Manual (Page 19)

19
RQT9048
Ad
vanced Features
Specifying the Recording Time
RAM -R -R DL -RW(V) +R +R DL +RW
This function allows specifying the length of recording
time up to 4 hours.
During recording
repeatedly until the desired
time is reached.
The recording time and the unit’s display change
as follows: –
OFF 4:00 OFF 1:30
Counter (Cancel) OFF 0:30 OFF 1:00
OFF 3:00 OFF 2:00
Notes
This function does not work during scheduled recording or Flexible
Recording.
Recording stops and the set time is cleared if you press [g STOP].
The unit turns off automatically when the time to stop recording is
reached as long as you do not operate the unit.
Flexible Recording
RAM -R -R DL -RW(V) +R +R DL +RW
The unit sets the best possible picture quality that fits
the recording within the remaining disc space.
The recording mode becomes FR mode. Refer to “FR
(Flexible Recording)” (
➔ 18).
With the unit stopped
Flexible Recording
Record in FR mode.
Max recording time 08 Hour 00 Min.
08 Hour 00 Min.
Cancel Start
Set recording time
w, q to select “Hour” and “Min.”
and e, r to set the recording time.
When you want to start recording
e , r, w, q to select “Start”, then
Recording starts. –
Tips
To exit the screen
Press [RETURN].
To stop recording partway
Press [g STOP].
To show the remaining recording time
Press [STATUS] to show the remaining recording time.
Rec. 0:59
Stereo
DVD-RAM
CH 20
Remaining time
•
•
•
Playing while you are recording
Chasing Playback
RAM
Allows playback from the beginning of what you are
recording.
When recording to DVD-RAM
(at least 20 seconds after
recording starts).
If the “Status Messages” in the Setup menu is set
to “Automatic” (
➔ 46), both the “Play” and “Rec.”
indicators will be displayed on the status message
screen for several seconds.
–
Tips
To stop play
Press [g STOP] once.
To stop recording
Press [g STOP] at least 2 seconds after chasing playback stops.
Simultaneous Record and Playback
RAM
Allows playback of a previous recording, while
recording something else.
When recording to DVD-RAM
e, r, w, q to select the
recording to play, then
If the “Status Messages” in the Setup menu
is set to “Automatic” (
➔ 46), both the “Play”
and “Rec.” indicators will be displayed on the
status message screen for several seconds.
–
Tips
To stop play
Press [g STOP].
To exit the DIRECT NAVIGATOR screen
Press [DIRECT NAVIGATOR].
To stop recording
After play stops
1. Press [DIRECT NAVIGATOR] to exit the screen.
2. Press [g STOP].
Notes
During playing while you are recording, you cannot edit or delete
recordings.
Closed captions will not appear during simultaneous recording and
playback.
Use caution while operating the control for playback. Pressing
[g STOP] when the recording device is selected will cancel the
recording in progress. •
•
•