Panasonic DIGA DMR-EA18 - Manual (Page 14)

14
RQT9048
Recording Set Top Box Programs
Refer to “Important Notes for Recording” ( ➔ 17) and “Advanced Recording” ( ➔ 18, 19) for detailed information on
recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
When using the set top box, make sure it is turned on.
RAM If the disc is protected, release protection ( ➔ 40).
•
•
•
to turn the unit on.
“HELLO” appears on the unit’s display. –
;OPEN/CLOSE
to open the tray
(Button located on the upper front of the unit) .
Insert a disc with enough remaining blank space and press
[; OPEN/CLOSE] again to close the tray. –
3a When the set top box is controlled with this unit:
to select desired channel.
or
3b When the set top box is not controlled with this unit:
to select “IN1” or “IN2”.
Select a channel on the connected equipment. –
to select the recording mode.
Recording mode should be determined by program length and
available time on the disc (
➔ 18).
Recording mode Remaining time
–
to start recording.
REC
Pausing Recording
Press [h PAUSE].
Press again to restart recording. –
Stopping Recording
Press [g STOP].
3a
Tips
Icons such as “ RAM ” indicate usable
discs. Refer to pages 55 and 56.
•
Notes
-R -R DL -RW(V) +R +R DL +RW
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
You cannot change the channel or
recording mode during recording.
•
•
3b