Advanced playback, Press and hold.), E, r to select the time, then – Panasonic DIGA DMR-EA18 User Manual

Page 24: Quick view (play x1.3), Slow-motion play, Frame-by-frame viewing, Time slip, Cm skip, Create chapters, Tips

Advertising
background image

24

RQT9048

Quick View (Play x1.3)

RAM

Allows you to increase the play speed slightly without
distorting the audio.

During playback

(Press and hold.)

Press again to return to normal speed.

Slow-motion Play

RAM

-R

-R DL

-RW(V)

+R

+R DL

+RW

DVD-V

-RW(VR)

While paused

or

There are 5 slow-motion speeds. Each press
increases the speed.
Press [q PLAY] to restart normal playback.

Notes

If continued for approx. 5 minutes, slow-motion play pauses
automatically (except

DVD-V

).

Frame-by-Frame Viewing

RAM

-R

-R DL

-RW(V)

+R

+R DL

+RW

DVD-V

-RW(VR)

While paused

Each press shows the next or previous frame.
Press and hold to advance or reverse frame-by-
frame in succession.
Press [q PLAY] to restart normal playback.


Time Slip

RAM

-R

-R DL

-RW(V)

+R

+R DL

+RW

-RW(VR)

Use to skip in 1-minute or 10-minute increments.

During playback

e, r to select the time, then

Each press of e or r advances the interval
by 1 minute (press and hold for 10-minute
intervals).

CM Skip

RAM

-R

-R DL

-RW(V)

+R

+R DL

+RW

-RW(VR)

Skips 1-minute forward with each press.

During playback

Create Chapters

RAM

During playback

Tips

You can skip to the start of a chapter by pressing [u, i].

Tips

Depending on the disc, some operations may not be possible.

Changing Audio during Playback

to select the audio.

Available audio will differ based on disc type.
See below.

RAM

-RW(VR)

Stereo

Mono L

Mono R

e.g.:

RAM

“Stereo” is
selected.

Play

Stereo

DVD-RAM

RAM

-RW(VR)

When playing a multilingual broadcast,

you can choose between Main Audio and SAP Audio.

Main Audio

SAP Audio

DVD-V

This allows you to change items like the audio channel
number and the soundtrack language (

➔ 38).

Soundtrack

1 ENG

Digital 3/2.1ch

e.g., English is the selected language.

Notes

If you cannot change the audio type when you have used only an
optical digital audio cable for connection, set “Dolby Digital” to “PCM”
(

➔ 46). Alternatively, you may connect to an amplifier or system

component with an audio cable and change the input on the amplifier
or system component to suit the connection (

➔ 53).

Advanced Playback

Advertising