Pioneer DVH-P5900MP - Manual (Page 28)

Notes
! With some discs, the icon
may be dis-
played and operation may not be possible.
! With Video CD, direct search is not possible
during PBC playback.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
! To perform this function, set the remote
control to DVH mode.
1 Press DIRECT.
Track number input display appears.
2 Press 0 to 9 buttons to enter the desired
track number.
! To select 3, press 3.
! To select 10, press 1 and 0 in order.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
Notes
! After entering the number input mode, if you
do not perform an operation within about
eight seconds, the mode is automatically can-
celed.
! During playback of Video CDs featuring PBC
(playback control), this function cannot be op-
erated.
Pausing Video CD playback
Pause lets you temporarily stop disc playback.
% Press f during playback.
The icon e is displayed and playback is
paused, letting you view a still image.
# To resume playback at the same point that you
turned pause on, press f again.
Note
Depending on the disc and the playback location
on the disc, the icon
may be displayed, indicat-
ing that still playback is not possible.
Frame-by-frame playback
This lets you move ahead one frame at a time
during playback.
% Press r.
Each time you press r, you move ahead one
frame.
# To return to normal playback, press f.
Notes
! There is no sound during frame-by-frame play-
back.
! Depending on the disc and the playback loca-
tion on the disc, the icon may be displayed,
indicating that frame-by-frame playback is not
possible.
! With some discs, images may be unclear dur-
ing frame-by-frame playback.
! Reverse frame-by-frame playback is not possi-
ble.
Slow motion playback
This lets you slow down playback speed.
1 Press r and hold during playback.
The icon is displayed, forward slow motion
playback begins.
# To return to normal playback, press f.
Operating this unit
En
28
Section
03