Pioneer DVH-P5900MP - Manual (Page 49)

2 Click the joystick.
Parental lock setting menu is displayed.
3 Press NUMBER buttons to input a four
digit code number.
4 Move the joystick left or right to move
the cursor to the previous or next position.
5 Move the cursor to the last position by
moving the joystick right after entering the
four digit code number.
The code number is set, and you can now set
the level.
6 Move the joystick left or right to select
the desired level.
! LEVEL 8 – Playback of the entire disc is pos-
sible (initial setting)
! LEVEL 7 to LEVEL 2 – Playback of discs for
children and non-adult-oriented discs is
possible
! LEVEL 1 – Playback of discs for children
only is possible
7 Click the joystick.
The parental lock level is set.
Notes
! The parental lock level is recorded on the disc.
Look for the level indication written at the disc
package, included literature or on the disc it-
self. Parental lock of this unit is not possible if
a parental lock level is not recorded in the
disc.
! With some discs, the parental lock may be ac-
tive only on the scenes with certain levels. The
playback of those scenes will be skipped. For
details, refer to the instruction manual that
came with the discs.
! Pressing RETURN takes you back to the pre-
vious display.
Changing the level
You can change the set parental lock level.
1 Move the joystick up or down to select
PARENTAL.
2 Click the joystick.
Parental lock setting menu is displayed.
3 Press NUMBER buttons to input the re-
gistered code number.
4 Move the joystick left or right to move
the cursor to the previous or next position.
5 Move the cursor to the last position by
moving the joystick right after entering the
four digit code number.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
icon
is displayed. Press CLEAR and input the
correct code number.
# If you forget your code number, refer to If you
forget your code number on this page.
6 Move the joystick left or right to select
the desired level.
7 Click the joystick.
The parental lock level is set.
Note
Pressing RETURN takes you back to the previous
display.
If you forget your code number
Refer to Changing the level on this page, and
press
CLEAR 10 times. The registered code
number is canceled, letting you register a new
one.
Operating this unit
En
49
Section
03
Operating
this
unit