Pioneer DVD-V7200 Industrial DVD Player RS-232C - Manual (Page 29)

Command Descriptions
- 21 -
The available address modes in each disc type are listed below:
Address Mode DVD
LB-compatible
DVD
CD VCD
FR (frame) X X
TM (time) X X X
CH (chapter) X X
TI (title)
BK (block)
IX (index) X
TR (track) X
When playing back a VCD disc, sometimes an Auto Stop command within a Block
Number address misses the specified address. Depending upon when the command is
sent, a playback address may be missed by a maximum of ten-blocks.
Execution :
Command String Status Return DVD-V7200
MF<CR> R<CR> Play mode to Multi-Speed mode
TM0325MF<CR> plays to 3 minutes 25 seconds Pause mode to Multi-Speed mode
R<CR> Pause mode
5.15 Speed (DVD, VCD)
Function : Specifies the speed for Multi-Speed playback
Format : Integer SP
Explanation : The command rewrites the contents of the Speed Register and returns
the completed status message. The current mode of the player does not change.
The speed parameter indicates the number of fields per second. The range is 0
through 45 with a default value of 30 fields per seconds. The relationship between the
integer, speed parameter and the actual speed of the player is as follows:
Integer Speed Parameter Speed
30 23~45 ½
15 12~22 ¼
7 6~11 1/8
4 3~5 1/16
1 0~2 Step1
NOTE: Forward speeds greater than 1x are not available.
NOTE: There is no multi-speed reverse option without 1/2 speed in DVD. VCD
offers 1/2 to 1/16 speed forward only.