Pioneer DVD-V7200 Industrial DVD Player RS-232C - Manual (Page 34)

PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual
- 26 -
Command String Status Return DVD-V7200
LOSE<CR> R<CR> Search mode to Still mode
?T<CR> 13642<CR> Time code in program end area
LOPL<CR> R<CR> Continue playing to lead-out and
then return R<CR>
5.20 Clear
Function : Clears the digit buffer or mode
Format : CL
Explanation : The command clears the digit buffer content (input value) and returns the
completed status message immediately.
The command releases the Auto Stop or the Stop Marker modes and returns the
completed status message immediately. After the commands are released, the player
begins normal playback. But the command does not release Multi Speed command.
The command releases the Repeat mode and execution of Command Stuck.
Execution :
Command String Status Return DVD-V7200
FR22000CL2300SE<CR> searches to frame 2300 Play mode
R<CR> Still mode
TM500SMPL<CR> R<CR> Play with Stop Marker
CL<CR> R<CR> Stop Marker is released and
player begins normal playback
5.21 Frame (DVD)
Function : Address specification flag is set to frame
Format : FR
Explanation : Address assignment proceeds frame by frame. All subsequent
addresses are handled as a frame number.
Execution :
Command String Status Return DVD-V7200
FR123450SE<CR> searches to frame 123450 Play mode to Search mode
R<CR> Still mode
[maximum number of frames is 7-digits in length (# # # # # # #)]