Pioneer DVD-V7200 Industrial DVD Player RS-232C - Manual (Page 92)

PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual
- 84 -
10. ADDITIONAL NOTES
1. If the disc that is currently playing has a picture stop code recorded, when the player reaches
the stop code point, it enters Still Mode.
2. If Prohibit Pause is set for Stop Marker playback, an error is issued at any Stop Marker Point.
3. Whenever a computer controls the player, send the KEY LOCK command to eliminate
possible interference from the front panel buttons and/or the remote control unit.
4. If an address that does not exist is set in a command for a CD or VCD disc, error E04 is
returned.