Pioneer DVD-V7200 Industrial DVD Player RS-232C - Manual (Page 33)

Command Descriptions
- 25 -
The available address modes are listed below:
Address Mode DVD
LB-compatible
DVD
CD VCD
FR (frame) X X
TM (time) X X X X
CH (chapter) X X
TI (title) X X
BK (block) X
IX (index) X X
TR (track) X X
Sometimes, an Auto Stop command within a VCD Block Number Address misses the
specified address. Depending upon when the command is sent, a playback address
may be missed by a maximum of a few ten-blocks.
Execution :
Command String Status Return DVD-V7200
TM0325SMPL<CR> R<CR> Pause mode to Play mode
MF<CR> R<CR> Multi-Speed mode
PL<CR> R<CR> Play mode
plays to 3 minutes 25 seconds
⇒
Still mode
5.19 Lead-Out Symbol
Function : Lead-Out is set for an address
Format : LO Command <CR>
Explanation : This symbol can be used in place of a time code or a frame number as
a target address for the Search or Auto Stop functions.
If the player has read the Table of Contents (TOC) from a disc, the Lead-Out Address
or a Frame Number can be translated into the time of a lead-out.
The Lead-Out Search command on a CD or VCD disc stops the player at the end of a
program area prior to the read-out area while the Lead-Out Search command on a
DVD disc stops the player at the end of this title.
NOTE: On a VCD disc, the search address is set at several seconds prior to the lead-
out point because the Lead-Out command requires the player to read video data in
advance.
Execution :