Pioneer DVD-V7200 Industrial DVD Player RS-232C - Manual (Page 65)

Current Address Request Descriptions
- 57 -
3
ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν
4
ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν
5
ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν
6
ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν
7
ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν
8
ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν
9
ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν
Line 0 displays the Time Code/Frame Number and/or Title/Chapter/Track Number.
The user’s area has lines numbered from 0 to 9, a total of 10 available lines. If line 0
is designated to show system information, all following lines are not displayed.
The player allows up to 320 characters (32 characters per each line with 10 lines
available) to be displayed. Follow the instructions below to create a User’s Display:
1. Select User's Display in Register A
2. Set the display data using Print Character command
3. Turn display switch ON (Set Display Control command)
Execution :
Command String Status Return DVD-V7200
1DS<CR> R<CR> Display Off to Display On
1RA<CR> R<CR> Only frame number is displayed
6.15 Register B Set
Function : The current setting of Register B is rewritten
Format : Integer RB
Explanation : The command rewrites Audio and Video Squelch Switch attributes into
Register B. The squelch switch is controlled automatically in accordance with
operating mode of the player. However, by rewriting the contents of Register B, it is
possible to invalidate the squelch switch except the squelch during seach.