Panasonic BBHGW700A User Manual
Page 20
Operating Instructions
20
Notes
•
All user information (video images, still images, Internet contents etc.) is the responsibility
of the customer. Access to this information should be limited to users or user groups, and
third parties should not be allowed to refer to, modify, delete or copy this information.
•
When changing the setup of the camera or camera portal, see Using Camera. (see page 39)
•
Sometimes a camera image on the Camera Portal may not open when clicked, due to a
popup blocker.
Privacy and Image Right
When installing and using this camera, it is the customers responsibility not to infringe on
privacy or copyright rules and regulations.
*
It is generally accepted that "Privacy is the legal right not to have one's private life displayed
in public, and the right to have control over one's own personal information. Image right is
the right to not have portraits or photographic images of one's self created by a stranger or
displayed in public".
•
A blue unmarked window is displayed when
the camera is outside operation time. If a
blue unmarked window is displayed even
when the camera is operating, click
[Refresh Camera].
(The blue unmarked window may be
displayed when authentication is being
confirmed.)
•
If the camera and this product are
disconnected while sending or receiving
data, a key mark (when camera
authentication is set up) or a blue
unmarked window is displayed. In this
case, after checking that the camera's
power supply and connections are correctly
inserted, click [Refresh Camera].
4.
Click the camera frame you want to access.
•
If an authentication window is displayed,
enter the camera's user name and
password. Then the camera image is
displayed.
If the camera portal is not displayed...
•
Check that "http:// IP address(WAN) or URL : port number" was entered correctly
into the address bar.
•
Sometimes it is necessary to set up the web browser's proxy server to access the
website. (see page 122)
•
When a camera name, an X mark, or a white page is displayed on the camera portal,
click [Refresh Camera].