Panasonic BBHGW700A - Manual (Page 86)

Operating Instructions
86
Note
The PPTP client connecting to this product's PPTP server only supports Windows XP or Windows
2000 PPTP clients.
Options
This function allows you to set up an authentication method and encryption method.
Data Entry Field
1.
Check MS-CHAP or MS-CHAPv2 are used; or
Only MS-CHAPv2 is used, in Authentication
Method Setup.
2.
Check either None, MPPE 40 bit or MPPE 128
bit are permitted; MPPE 40 bit or MPPE 128 bit
are permitted; or MPPE 128 bit is permitted, in
Encryption.
3.
When setup is complete, click [Save].
4.
When [Restart] is displayed on the setup page,
click it.
Authentication This function allows you to specify a password authentication
method. When PPP connected, the MS-CHAP and MS-CHAPv2 use
an encryption authentication method whereby the user name and
password are encrypted and authenticated. The MS-CHAP
authenticates encrypted data in one direction, from the client to this
product only. Whereas the MS-CHAPv2 authenticates data traveling
in both directions, so is even more secure than the MS-CHAP. Select
MS-CHAP or MS-CHAPv2 are used; or Only MS-CHAPv2 is used.
The default is set to MS-CHAP or MS-CHAPv2 are used.
Encryption This function allows you to specify an encryption method for the
main body of the message. MPPE encrypts VPN connection data
using PPTP. There are two encryption methods, which are MPPE
128 bit (strong) and MPPE 40 bit (standard), and data security
between this product and the PPTP connection is consolidated.
Check either None, MPPE 40 bit or MPPE 128 bit are permitted;
MPPE 40 bit or MPPE 128 bit are permitted; or MPPE 128 bit is
permitted. The default is set to MPPE 40 bit or MPPE 128 bit are
permitted.