Panasonic BBHGW700A - Manual (Page 27)

27 [For assistance, please call: 1-800-272-7033]
Operating Instructions
Functions
Notes
• When registering or editing, restart all PCs connected to the LAN (home) side.
• When adding more PCs after setup has been completed, connect the new PCs to jacks
LAN1 to LAN4 and then restart.
4.
Enter ISP Name.
• Enter no more than 20 characters. In the
example right, "abcde" has been entered.
5.
Enter the IP Address, Subnet Mask, Gateway
and DNS server 1, 2, and if specified by the
ISP, enter the Domain Name.
• See the ISP's setup information. To return
to the original settings, click [Cancel].
6.
When setup is complete, click [Save and Go to
Connection Mode].
• The connection mode page is displayed.
7.
Select the ISP entered in step 4.
8.
When setup is complete, click [Save].
• The entered information is saved.
Note
When saving, do not cut the power supply. If cut, saving might not be completed successfully.
9.
When [Restart] is displayed on the setup page,
click it.
10.
Restart the PC.
• Check that the PC is connected to the
Internet. (see page 36)