Palm PalmTM m100 - Manual (Page 16)

Page 8 Introduction to Your Handheld
Upgrading from another Palm OS
handheld
If you already own a Palm OS handheld, you must install the version
of Palm Desktop software that comes with your new handheld. To
upgrade quickly and easily, perform the tasks described in the
following sections. Some tasks are specifically for upgrading.
Preparing to use your handheld
Before you begin using your handheld and Palm Desktop software,
you must complete a few easy installation tasks.
To use your handheld and Palm Desktop software, complete the
following:
■ (If upgrading) Perform a HotSync operation using your old
handheld and cradle/cable. This ensures all data on your
handheld is on your desktop computer.
■ Connect the HotSync cradle/cable that comes with your Palm
m100 series handheld to your computer. See “Connecting the
HotSync cradle/cable” later in this chapter for details.
■ (If upgrading) You may want to create a copy of your old Palm
Desktop software folder and its contents before installing your
new Palm Desktop software. If you do this, rename the copied
folder (for example, Palm Old), and store it outside the Palm
Desktop software folder. This step is optional.
■ Install the Palm Desktop software that comes with your Palm m100
series handheld. See “Installing Palm Desktop software” later in
this chapter for details.
Universal
connector Connects your handheld to the cradle/cable,
which in turn connects to the back of your
computer. This allows you to update the
information between your handheld and
computer using HotSync technology.
The universal connector also connects peripheral
hardware devices, such as a modem, to your
handheld.