Palm PalmTM m100 - Manual (Page 90)

Page 82 Using Your Basic Applications
The HotSync Progress dialog box reappears and synchronization
begins.
5. Wait for a message on your handheld indicating that the process is
complete.
After the HotSync process is complete, you can remove your
handheld from the cradle/cable.
Tip: Gently rock your handheld forward in the cradle and then
lift it to remove.
Beaming information
Your handheld is equipped with an IR (infrared) port that you can use
to beam information to another Palm OS handheld that’s close by and
also has an IR port. The IR port is located at the top of the handheld,
behind the small dark shield.
You can beam the following information between Palm OS handhelds:
■ The record currently displayed in Date Book, Address Book, To Do
List, Note Pad, or Memo Pad
■ All records of the category currently displayed in Address Book,
To Do List, Note Pad, or Memo Pad
■ A special Address Book record that you designate as your business
card, containing information you want to exchange with business
contacts
■ An application installed in RAM memory
■ An application installed on an expansion card that is seated in the
card slot
Note: You can also perform HotSync operations using the IR port.
See “IR HotSync operations” in Chapter 6 for more details.