Step 2 - select outputs, Step 3 - select equipment – Polycom C16 User Manual
Page 284
Advertising
Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
9 - 68
Step 2 - Select Outputs
Six mono audio amplifiers are added to the system in this step. The output to
the telephone line and VSX8000 were created when their respective input com-
ponents were added to the system in step 1.
Step 3 - Select Equipment
The default equipment selection will use two C12’s, and a TEL1 telephony
card.
Advertising