Am_slope gain sharing automixer slope, Description, Gpio control parameters – Polycom C16 User Manual
Page 449: Analog_gpio_value analog gpio value
Command Protocol Reference Guide
A - 107
am_slope Gain Sharing Automixer Slope
Description
This parameter defines how much attenuation (in dB) is applied to
microphones in the specified automixer group when they don't have the
highest level in the group. For example, if a microphone has a level that is 6.0
dB lower than the loudest mic, and its slope is 2.0, then 12.0 dB of attenuation
will be applied to the microphone.
This parameter is only used if the automixer group is in gain sharing mode. If
the automixer group is in gating mode, the parameter is ignored.
GPIO Control Parameters
analog_gpio_value Analog GPIO Value
Argument
Argument value
Channel Type
Global System
Value Type
Floating-Point
Read/Write Mode
Read/Write
Indices
1-63 : group number
System Limits
Minimum: 0.0, Maximum: 10.0, Resolution: 0.1
Default
2.0
User Limits
Supported
No
Argument
Argument value
Channel Type
Virtual Channel
Value Type
Integer
Read/Write Mode
Read/Write
Phys Chans
Analog General Purpose I/O Input
Virt Chans
Control
System Limits
Minimum: -2147483648, Maximum: 2147482647
Default
0
User Limits
Supported
No