Polycom C16 - Manual (Page 83)

Customizing SoundStructure Designs
5 - 3
When a virtual channel is moved, SoundStructure Studio redefines the virtual
channel to use the new physical inputs or outputs that are specified. Moving a
virtual channel does not create any visible changes in the matrix or channels
page since SoundStructure Studio operates at the level of the virtual channel
and not the physical channels. The only page that will show a difference is the
wiring page.
It is important that the actual wiring of the system match the wiring specified
on the wiring page - otherwise the system will not operate as expected. For
instance, in the example above if the recording output is physically plugged
into output 3 when SoundStructure Studio has been told the recording output
will be plugged into output 6, no audio will be heard on output 3 because the
audio is being routed to physical output 6.
For proper system operation, make sure the physical channel wiring matches the
wiring instructions on the channel page. Adjustments to the wiring can be done by
physically moving connections to match the wiring page, or by moving signals on
the wiring page to match the physical connections.