Step 2 - output signals, Step 2 - output signals –6 – Polycom C16 User Manual
Page 74
Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
4 - 6
Step 2 - Output Signals
In step 2 of the design process, the outputs from the system are specified in the
same manner that inputs were created. A sample collection of outputs is
shown in the following figure.
The outputs include audio amplifiers, recording devices, assistive listening
devices, and also other telephony or video codec systems. If the desired style
of outputs is not found, select something close and then customize the settings
as described in the next chapter.
In this example, a stereo amplifier was selected as well as a mono recording
output. The telephone and Polycom HDX video conferencing system outputs
were automatically created when their respective inputs were added to the
system. Notice that there are multiple audio channels associated with the
Polycom HDX codec. See Chapter 6 for additional information.