Step 2 - select outputs, Step 3 - select devices – Polycom C16 User Manual
Page 228
Advertising
Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
9 - 12
Step 2 - Select Outputs
Select a mono amplifier as the output source. The VTX1000 output will be
automatically defined when the VTX1000 input is defined.
Step 3 - Select Devices
Select the equipment required to create this design. By default the SoundStruc-
ture C16 is selected. Note that no telephony card is required as the VTX1000
will be the telephony interface.
Advertising