Description, Pstn_out_gain pstn output gain, Equalizer parameters – Polycom C16 User Manual

Page 397

Advertising
background image

Command Protocol Reference Guide

A - 55

Description

This parameter indicates the loop current (in milliamps) of the PSTN interface.

The value is only valid when the interface is off-hook.

pstn_out_gain PSTN Output Gain

Description

This parameter sets the gain (in dB) of the signal going to the PSTN interface.

Equalizer Parameters

Description

The line outputs (both conferencing and sound reinforcement) each have a

graphic equalizer that can have either 10 bands (1 octave), 15 bands (2/3

octave), or 31 bands (1/3 octave).
Most physical channel types have 10 bands of graphic equalization. The

Conference Link input and output physical channel types only have 5 bands

of graphic equalization. The signal generator and AEC reference physical

channel types do not support graphic equalization.
All physical channel types except the signal generator support a high-pass

filter, a low-pass filter, a high-shelf filter, and a low-shelf filter.

Argument

Argument value

Channel Type

Virtual Channel

Value Type

Floating-Point

Read/Write Mode

Read/Write

Phys Chans

Analog Telephony Output

Virt Chans

Mono

System Limits

Minimum: -20.0, Maximum: 20.0, Resolution: 0.5

Default

0.0

User Limits
Supported

No

Advertising
This manual is related to the following products:

C8, SR12, C12