Polycom C16 - Manual (Page 435)

Command Protocol Reference Guide
A - 93
Description
This parameter selects the audio source for the corresponding cr_mic_in or
sr_mic_in physical channels. The analog type selects the analog microphone
audio. The clink_mic type selects one of the ConferenceLink microphone
elements. Control of which element is selected is done through the
mic_source_index parameter.
Examples
nc_en Enable Noise Canceller
Description
This parameter enables (1) or disables (0) the noise cancellation (NC)
algorithm.
Phys Chans Conferencing Mic/Line Input, Sound Reinforcement Mic/Line
Input
Virt Chans Mono, Stereo
Values analog : Analog Mic Input (default)
clink_mic : ConferenceLink Mic Input
Argument Argument value
Command Response Description
set mic_source_type
'Table Mic 1' analog val mic_source_type
'Table Mic 1' analog Sets the mic_source_type for 'Table Mic 1' to analog.
get mic_source_type
'Ceiling Mic 1 A' val mic_source_type
'Ceiling Mic 1 A' clink_mic Queries the mic_source_type for 'Ceiling Mic 1 A'.
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Analog Telephony Input
Virt Chans Mono, Stereo
Default 0