Polycom C16 User Manual

Page 47

Advertising
background image

SoundStructure Design Concepts

3 - 3

The physical input channels and the physical output channels will be

numbered from 1 to the maximum number of physical channels in a system.

As described below, this approach is an enhancement of how traditional audio

signals are labeled and how their signals are uniquely referenced.

Physical Channel Numbering On A Single SoundStructure Device

As described previously, in single-device SoundStructure installations (for

example using a single SoundStructure C16), the physical channel numbering

for the inputs and outputs corresponds to the numbering on the rear-panel of

the device, for example, physical input channel 3 corresponds to input 3 on the

SoundStructure C16 device and so on as illustrated in the following figure.

Physical Channel Numbering With Multiple SoundStructure Devices

When multiple SoundStructure devices are linked using OBAM to form a

multi-device SoundStructure system, instead of using a device identification

number, the physical channel numbering for both the inputs and the outputs

will range from 1 to the maximum number of inputs and outputs, respectively,
in the system. This is an extension of the single device setup where the physical

channel numbers for channels on the second device are the next numbers in

the sequence of inputs from the first device. For if there are two devices and

the first device is a SoundStructure C16, the first input on the second device

becomes physical input 17. This continuation of the sequence of numbers is

possible due to the design of the OBAM Link interface.
OBAM Link is the method for connecting multiple devices together as simply

as connecting the OBAM Link cable from one device to the next. The next

figure shows the location of the OBAM connections and the OBAM OUT and

OBAM IN connections on the rear-panel of a SoundStructure device. To help

verify when the OBAM Link is connected properly, there are status LEDs near

the outer edge of each connector that illuminate when the devices are linked

successfully.

Input Physical Channels 1 - 16

Output Physical Channels 1 - 16

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

OUTPUTS

INPUTS

SoundStructure C16

TM

Advertising
This manual is related to the following products:

C8, SR12, C12