Pioneer DVR-745H-S - Manual (Page 103)

The Video Adjust menu 13
103
En
Creating your own set
There are three user presets in which you
can save your own set of picture quality
settings.
1 Follow Choosing a preset above and
select one of the user presets (Memory 1,
2 or 3).
2 Select ‘Detailed Settings’.
3 Select the setting you want to
adjust.
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive.
• PureCinema – This setting optimizes the
picture for film material when the video
output is set to progressive. Usually set
to
Auto , but try switching to Off if the
picture appears unnatural.
• 3-D Y/C – Adjusts the brightness /
colour separation (NTSC video input
only).
• YNR – Adjusts the amount of noise
reduction (NR) applied to the Y
(brightness) component.
• CNR – Adjusts the amount of noise
reduction (NR) applied to the C (colour)
component.
• White AGC – Turn on for automatic
white level adjustment. 1
• White Level – Adjusts the intensity of
white.
• Black Level – Adjusts the intensity of
black.
• Black Setup – Corrects the standard
reference black level (NTSC video input
only).
• Hue – Adjusts overall balance between
red and green.
• Chroma Level – Adjusts how rich the
colors appear.
4 Adjust the currently selected
setting.
5 Press to exit.
You can now use the preset for any other
input or the built-in TV tuner.
Tip
• To see more of the picture as you adjust
different settings, press ENTER after
selecting the setting you want to adjust.
ENTER
Detailed Settings
7ch
Memory1
ENTER
Memory1
3-D Y/C
Motion Still
PureCinma
Prog. Motion
Auto
Motion Still
7ch
White Level
CNR
YNR
White AGC Off
Max
Off
Off
Max
Max Min
Note
1 When White AGC is On , the White Level setting can’t be adjusted.
ENTER
HOME
MENU
DVR745H_IBD_EN.book 103 ページ ２００６年７月２７日 木曜日 午後４時１１分