Pioneer DVR-745H-S - Manual (Page 42)

Recording 05
42
En
2 Select ‘New Input’ to set a new timer
program, then press ENTER.
3 Enter the timer recording settings.
Use the
/
buttons to select a field; use
the
/
buttons to change the value.
• CH – Choose a channel (2 to 69 for
antenna channels; 1 to 125 for cable/Pr 1
to Pr 99, excluding skip channels), or one
of the external inputs from which to
record.
• Date – Choose a date up to one month in
advance, or select a daily or weekly
program.
• Start – Set the recording start time.
• Stop – Set the recording end time
(maximum length of a timer recording is
24 hours).
• Extend – Extend the end time of the
timer recording (select Off , 30 , 60 , 90 or
120 mins.)
4 If you want to change the recording
mode, recording destination, etc., select
‘Set Detailed’.
In this area you can set:
Record to – Select HDD for hard disk
recording or DVD for DVD recording. Select
HDD for Auto Replace Recording (daily or
weekly timer recording only).
Recording Mode – Select XP , SP , LP , EP ,
SLP or SEP , (See Setting the picture quality/
recording time on page 36). If Manual
Recording is on, then you can also select the
LPCM setting, or MN (press ENTER then use
the / buttons to select the level).
Auto Replace Rec. – Automatically erases
the previous daily or weekly recording when
the next one is recorded.
Genre – Select a record genre (for HDD
recording only).
Dual Mono/Bilingual Recording – Select
which channel of a dual mono/bilingual
broadcast to record (necessary if recording
to a Video mode DVD or to the HDD with the
HDD Recording Format set to Video Mode
On ).
HDD Recording Format – Select Video
Mode On or Video Mode Off depending on
whether you need high-speed copying to
Video mode DVD capability or not.
5 After entering all the timer recording
information, highlight ‘Store Program’
and press ENTER.
The timer recording list screen is displayed
again. The timer program you just input
appears in the list. The rightmost column
shows various timer recording status
messages:
• OK – Can be recorded.
• Time Over – Not enough space on the
HDD (the recording won’t finish).
• Over 12h – Recording time of over 12
hours set (when recording to the HDD
the recording will be split into two titles).
• Overlap – Two timer programs partially
or completely overlap. The one starting
earlier will take priority.
• Until ... (eg., Until 8/13) – For a regular
recording, the last program that could
be recorded is shown.
• Data Over –Can’t record because the
disc management area of the disc is full.
• Cancel Once – A regular timer program
is set to skip.
• Can’t Rec – Not possible to record.
• Title Over – Can’t record because there
is already the maximum number of titles
on the disc (HDD: 999; DVD: 99).
• Recording – The program is currently
recording.
Timer Program Set
Manhattan Open Tennis
CH Date Start Stop Extend
10ch EVERYDAY 6:00PM 7:00PM 30 min
Enter Details Detailed Settings
Record To HDD
Recording Mode XP
Auto Replace Rec. On
Genre No Category
Dual Mono Recording L
HDD Recording Format Video Mode On
Store Program
Cancel
Set Title Name
Set Detailed
DVR745H_IBD_EN.book 42 ページ ２００６年７月２７日 木曜日 午後４時１１分