Additional information 15 – Pioneer DVR-745H-S User Manual

Page 125

Advertising
background image

Additional information

15

125

En

HDMI

If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.

Problem

Remedy

The connected HDMI or
DVI device does not
display any picture
(and the front panel
HDMI indicator does
not light)

• Try disconnecting then reconnecting the HDMI cable (while the
power of both components is on).
• Try switching the power of the HDMI/DVI device off then back on.
• Try switching off the HDMI/DVI device and this recorder. Next,
switch on the HDMI/DVI device and leave it for around 30 seconds,
then switch on this recorder.
• When you connect an HDMI-compatible device make sure of the
following:
– The connected device’s video input is set correctly for this unit.
– The cable you’re using is fully HDMI-compliant. Using a non-
standard cable may result in no picture being output.
– Don’t use several HDMI cables connected together. Use a single
cable to connect devices together.
• When you connect a DVI-compatible device make sure of the
following:
– The connected device’s video input is set correctly for this unit.
– The DVI terminal on the connected device is HDCP-compatible.
– The connected device is compatible with NTSC (720 x 480i/p, 1280 x
720p, 1920 x 1080i) and PAL (720 x 576i/p, 1280 x 720p, 1920 x 1080i)
video input.
• If the recorder’s internal HDD is damaged or broken, there will be no
HDMI output.
• Not all HDCP-compatible DVI devices will work with this recorder.

No video from the
HDMI output.

If you choose a setting that is incompatible with your TV you may not
be able to see any picture at all. In this case, press

(PLAY) while

holding down the

(STOP) button on the front panel to switch the

setting (this also switches Component Video Out on page 108 to the
default setting).

There’s no sound from
the connected HDMI or
DVI device.

• There is no sound when using a DVI terminal.
• Some HDMI-compatible devices do not output sound (check with
the manual that came with the connected device).

15 Additional_Information.fm 125 ページ 2006年7月28日 金曜日 午前8時49分

Advertising