Pioneer DVR-745H-S - Manual (Page 108)

The Initial Setup menu 14
108
En
Video In/Out Settings
Input Colour
System Next Screen Proceed to the next screen to set the input colour
system for the external input and the built-in TV
tuner. Use the
CH +/– buttons to change the preset.
On the default Auto setting the recorder can gener-
ally correctly detect whether the input signal is PAL,
SECAM, 3.58 NTSC or PAL-60, but in some cases you
may have to set it manually if the picture is displayed
incorrectly.
See also About the input color system on page 117 for more information on this setting.
Component Video
Out Interlace • Select if your monitor/TV is not compatible with pro-
gressive-scan video.
Progressive Select if your monitor/TV is progressive-scan compat-
ible. Check the operating instructions that came with
your monitor/TV if you’re not sure.
If your TV is incompatible with progressive scan video and you select Progressive , you will not be able to see any
picture at all . In this case, press ( PLAY ) while holding down the ( STOP ) button on the front panel to
switch to Interlace (this also switches Screen Resolution on page 114 to the default setting).
When an HDMI device is connected and Video Priority Mode is set to HDMI , the Component Video Out setting is
automatically set to Interlace .
NTSC on PAL TV On NTSC discs will play correctly on PAL-only TVs.
Off • Use if your TV is already NTSC-compatible.
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 117 for related information.
Audio In
NICAM Select
(except Taiwan and
Philippines model)
NICAM • Record the NICAM audio in a NICAM broadcast.
Regular Audio Record the non-NICAM audio in a NICAM broadcast.
(You can still switch the audio to record using the
AUDIO button before recording.)
Tuner Level
(except Taiwan and
Philippines model)
Normal • Standard setting.
Compression Use if the audio level from the built-in tuner is exces-
sive, causing distortion.
External Audio Stereo • Select if the audio from the currently selected exter-
nal input is standard stereo.
Dual Mono/
Bilingual Select if each channel carries a separate soundtrack.
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder
whether the audio is stereo or dual mono/bilingual. This has priority over the setting you make here.
Setting Options Explanation
DVR745H_IBD_EN.book 108 ページ ２００６年７月２７日 木曜日 午後４時１１分