Adding a remap, Virtual key, function and macro – Psion Teklogix Hand-Held Computer 7530 G2 User Manual
Page 127
Psion Teklogix 7530 G2 Hand-Held Computer User Manual
99
Chapter 5: Configuration
Keyboard Properties
Adding A Remap
To add a new remapping:
•
Tap on the Add button at the bottom of the dialog box.
The Remap Scancode dialog box is displayed.
•
Type the scan code in hexadecimal in the field labelled Scancode
Note: The Label field displays the default function of the scancode you
are remapping.
Virtual Key, Function And Macro
The radio buttons at the bottom of the dialog box allow you to define to what the
scan code will be remapped: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when
the virtual key is sent. If No Force is selected, the shift state is dependent on whether
the shift state is on or off at the time the virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the
dialog box.
•
Choose Virtual Key, Function or Macro.
•
Choose a function from the Function list in the dialog box, and tap on OK.