Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 51)

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 23
Chapter 2: Basic Checkout
Assigning An IP Address
6. Saving and exiting the radio setup.
Once you’ve completed the configuration, press [ENTER], or tap
on OK.
The connection you created will be listed in the Wireless Information tab as a
preferred network. The radio will search for the SSID and will compare the WEP
and authentication information you specified. If there is a match between your hand-
held settings and the access point settings, the hand-held will communicate on the
network through the access point.
2.3.1 Assigning An IP Address
If your network is not using a DHCP server, you will need to assign an IP address.
• In the PTXCF8385P N1 Settings window, display the IP Information tab.
Figure 2.7 IP Information
Note: Tapping the Renew button forces the 7530 G2 to renew or find a new
IP address. This is useful if, for example, you are out of communication
range for a longer period of time and your 7530 G2 is dropped from
the network.
To define a static IP address:
• Tap on the Configure button.