Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 143)

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 115
Chapter 5: Configuration
The Devices Tab
5.7.1 The Devices Tab
Note: If you intend to configure Bluetooth communication with specific devices
(e.g., a scanner or printer), turn on the devices and bring them within 5
metres of the hand-held before proceeding with the discovery process
described below.
Scan
• Tap on the Scan button to list available devices.
Wait for the 7530 G2 to complete its scan (approximately 20 seconds). When
scanning starts, the Scan button will change to Stop – if necessary, you can
tap on this button to stop the process. Once scanning is complete, all discovered
devices will be displayed in the list box, with Name, Address, Active status,
and PIN information.